How to install artificial turf



 1. Cleaning and measuring the area 

Clean the floor and remove the moisture.
Unroll the artificial turf rolls on the floor and match the size.
At this time, flatten the artificial turf to make sure both sides fit well.
Please note that if it doesn't fit well at first, needs to cut off.

 2. Attaching artificial turf                      

   A. Attaching with Joint tape
Turn both sides in the width direction of the artificial turf and apply urethane glue on the joining tape to bond the two artificial turf.

  B. Attaching with Floor adhesive
Fold the artificial turf in half to prepare the adhesive, and then thoroughly place the adhesive on the floor. After 10 to 20 minutes, roll out artificial turf over the adhesive.

 3. Trimming artificial turf                          

After spreading the artificial turf well without wrinkles, carefully match the seams on both sides of the artificial turf. If the seams do not fit, you need to cut them carefully with scissors.


 4. Installing infill                      

Install infill material (SEBS, Silica sand) to artificial turf. It is recommended to install infill so that about 1 cm of the artificial turf pile comes out. (Infill is used when constructing artificial turf for sports.

Head office  7-4, Saemaeul-ro 177beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea

TEL : +82-1644-3663  /  FAX : +82-031-778-7631


Sangju Plant  135-11, Daegasan-ro, Modong-myeon, Sangju-si, Gyeongsangbuk-do, Republic of Korea

TEL : +82-1800-8964  /  FAX : +82-054-536-9907


Copyright(c) 2020 www.jmcgr.co.kr. All rights Reserved.

Head office  7-4, Saemaeul-ro 177beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea

TEL : +82-1644-3663  /  FAX : +82-031-778-7631


Sangju Plant  135-11, Daegasan-ro, Modong-myeon, Sangju-si, Gyeongsangbuk-do, Republic of Korea

TEL : +82-1800-8964  /  FAX : +82-054-536-9907